Injection Stretch Blow Molding Machine ISBM 400

Detailed Product Description

ISBM 400 Injection Stretch Blow Molding Machine
Technical Parameter

General parameter
Applicable material:  PET, PEN,PC, PPetc.
Nominal capacity: 1800 bottles/hr (PET,16g,8 cavities for each mold)
Screw diameter:  Φ60mm
Length/dia. ratio of screw:   22:1
Max. theory injection volume: 400cm3
Max. injection pressure:  100MPa
Max. plasticization:  32g/s
Injection closing force:  360kN
Injection mold strokes:  425mm
Blow mold closing force:  245kN
Blow mold stroke:   70×2mm
Rotary disk stroke:   225mm
Stretch seat stroke:  140mm
Stretch bar stroke:    100mm
Injection mold dim.:   720mm×200mm
Unloaded cycle time:  4.5s
Temp. regulating core stroke:  300mm
Temp. regulating tank stroke:  175mm
Stripping stroke:  150mm
Max.product dia. and height:  100 mm×200mm
Oil pump motor power:  30 kW
Barrel & mold heating power:  20.8 kW
Total power:  50.8 kW (The parameterdiffering on the numberof cavity)
Working power:  60-70% (The parameterdiffering on the type of product)
Center height:  1350mm
Overall dimension:  5000mm×1800mm×3100mm (L×W×H)
Weight Approx.:  12 tons

 

 

Outsourcing power
Power source:  3N+PE 50Hz 380V/220V (Three-phase five-wire)
Blowing air-pressure:  3-3.5MPa (PET, PEN)

                                1.2-1.5MPa (PC, PP)

Blowing air-flow rate:  500L/min
Pressure for low-pressure air:  0.7-0.9MPa
Flow rate for low-pressure air: 40L/min (0.7-0.9Mpa pressure)
Cooling water pressure:  0.3-0.4MPa
Cooling water flow rate:  50L/min (PET, PEN,PP)
Cooling water temperature:  10-15 (PET, PEN)
                                         15-30 (PP)
Flow rate for cooling tower:   80L/min
Pressure for cooling tower:   0.2-0.4MPa
Cooling tower temp.:  5~32 centi degree