Plastic Machine EBM-50

Detailed Product Description

EBM-50 Automatic Extrusion Blow Molding Machine

Technical Parameter

General parameter
Nominal capacity 3000-3200 bottles/hr  (200ml, 17g PE bottle)
                          Capacity is subject to bottle type, weight to great extent.
Screw diameter Φ65mm  (Adjustable upon products)
Length/dia. ratio of screw 24:1
Revolution of screw 18-86rpm
Max. plasticization 50-65kg/h  (PE)
Mold locking force 50kN
Mold head quantity Single mold head, two mold heads, three mold heads, four mold heads, six mold heads  (adjustable upon products)
Mold cavities of one side Single cavity, two cavities, three cavities, four cavities, six cavities  (adjustable upon products)
Total power 56.7kW
Heating sections of barrel 4 sections
Heating power of barrel 15kW
Screw driving motor power 22.0kW
Mold head heating power 14.2kW
Oil pump motor power 5.5kW
Running power 20-27kW  (Subject to different products)
Overall dimension 3300mm×3300mm×2500mm  (L×W×H)
Power source 3N+PE  50Hz  380V/220V  (Three-phase five-wire)
Subject to adjustment according to the end-use country
 
Outsourcing power requirement
Blowing pressure 0.8MPa
Compressed air consump. 60m³/h
Air source purification Class 100,000
Cooling water temp. 10-20  (PE)
Cooling water consump. 2.0m³/h