Extrusion Blow Molding Machine EBM-50

Detailed Product Description

EBM-50 Automatic Extrusion Blow Molding Machine
Technical Parameter

General parameter
Nominal capacity:  3000-3200 bottles/hr  (200ml, 17g PE bottle) 
Screw diameter:  Φ65mm  (Adjustable upon products)
Length/dia. ratio of screw:   24:1
Revolution of screw:  18-86rpm
Max. plasticization:   50-65kg/h  (PE)
Mold locking force:  50kN
Mold head quantity:  Single mold head, two mold heads, three mold heads, four mold
heads, six mold heads  (adjustable upon products)
Mold cavities of one side:  Single-cavity, two-cavity, three-cavity, four-cavity, six-cavity
Total power:  56.7kW
Heating sections of barrel:  4 sections
Heating power of barrel:  15kW
Screw driving motor power:  22.0kW
Mold head heating power : 14.2kW
Oil pump motor power : 5.5kW
Running power:  20-27kW  (Subject to different products)
Overall dimension:  3300mm×3300mm×2500mm  (L×W×H)
Power source:  3N+PE  50Hz  380V/220V  (Three-phase five-wire)  
  
Outsourcing power requirement
Blowing pressure:   0.8MPa
Compressed air consump.:   60m3/h
Air source purification :  Class 100,000
Cooling water temp. :  10-20  (PE)
Cooling water consump.:   2.0m3/h