Plastic Machinery ISBM-120

The plastic machine is applicable for pharmaceutical, health care and cosmetic.

The plastic machine is: ISBM-120 Automatic Injection Stretch Blow Molding Machine

Technical Parameter

General parameterApplicable material PETPCPPPA etc.Nominal capacity 900bottles/hr  (PET, 16g, 4 cavities for each mold)                          Capacity is subject to bottle type, weight to great extentScrew diameter Φ40mmLength/dia. ratio of screw 20:1Max. theory injection volume 120cm³Max. injection velocity 98cm³/sMax. injection pressure 120MPaMax. plasticization 12g/sScrew rotating speed 0-170rpmBarrel heating power 10.3kWHot runner heating power 4 kW-5kW  (According to the number of cavity)Injection core closing force 130kNInjection core stroke 250mmDie lip closing force 130kNDie lip stroke 205mmBlowing mold closing force 130kNBlowing mole stroke 75mm+75mmTemp. regulating core stroke  250mmTemp. regulating tank stroke 230mmTank heating power 1-2kW  ( According to the number of cavity )Product ejection stroke 170mmPressure of oil system 16MPa  (max)Oil pump motor power 18.5kWOil pump flowrate 105L/min +55L/minTotal power 34kW  (The parameter differing on the number of cavity)Working power 55% approx.  (The parameter differing on the type of product)Overall dimension 4100mm×1000mm×3000mm  (L×W×H)Weight approx 4.2 tons Outsourcing powerPower source 3N+PE  50Hz  380V/220V  (Three-phase five-wire) Subject to adjustment according to the end-use countryBlowing air-pressure 3-3.5MPa  (PET)                              1.2-1.5MPa  (PCPP)Blowing air-flowrate 500L/minPressure for low-pressure air 0.7-0.9MPaFlowrate for low-pressure air 40L/min  (0.7-0.9Mpa under working pressure)Cooling water pressure 0.3-0.4MPaCooling water flowrate 50L/min  (PETPP)Cooling water temperature 10-15  (PET)                                       15-30  (PP)Flowrate for cooling tower 80L/minPressure for cooling tower 0.2-0.4MPaCooling tower temp. 5-32

Plastic Machinery ISBM-120