Plastic Machinery ISBM-120

Detailed Product Description

The plastic machine is: ISBM-120 Automatic Injection Stretch Blow Molding Machine

Technical Parameter

General parameter
Applicable material PETPCPPPA etc.
Nominal capacity 900bottles/hr  (PET, 16g, 4 cavities for each mold)
                          Capacity is subject to bottle type, weight to great extent
Screw diameter Φ40mm
Length/dia. ratio of screw 20:1
Max. theory injection volume 120cm³
Max. injection velocity 98cm³/s
Max. injection pressure 120MPa
Max. plasticization 12g/s
Screw rotating speed 0-170rpm
Barrel heating power 10.3kW
Hot runner heating power 4 kW-5kW  (According to the number of cavity)
Injection core closing force 130kN
Injection core stroke 250mm
Die lip closing force 130kN
Die lip stroke 205mm
Blowing mold closing force 130kN
Blowing mole stroke 75mm+75mm
Temp. regulating core stroke  250mm
Temp. regulating tank stroke 230mm
Tank heating power 1-2kW  ( According to the number of cavity )
Product ejection stroke 170mm
Pressure of oil system 16MPa  (max)
Oil pump motor power 18.5kW
Oil pump flowrate 105L/min +55L/min
Total power 34kW  (The parameter differing on the number of cavity)
Working power 55% approx.  (The parameter differing on the type of product)
Overall dimension 4100mm×1000mm×3000mm  (L×W×H)
Weight approx 4.2 tons
 
Outsourcing power
Power source 3N+PE  50Hz  380V/220V  (Three-phase five-wire)
Subject to adjustment according to the end-use country
Blowing air-pressure 3-3.5MPa  (PET)
                              1.2-1.5MPa  (PCPP)
Blowing air-flowrate 500L/min
Pressure for low-pressure air 0.7-0.9MPa
Flowrate for low-pressure air 40L/min  (0.7-0.9Mpa under working pressure)
Cooling water pressure 0.3-0.4MPa
Cooling water flowrate 50L/min  (PETPP)
Cooling water temperature 10-15  (PET)
                                       15-30  (PP)
Flowrate for cooling tower 80L/min
Pressure for cooling tower 0.2-0.4MPa
Cooling tower temp. 5-32