Injection Stretch Blow Molding Machine ISBM-400

Detailed Product Description

ISBM 400 Automatic Injection Stretch Blow Molding Machine
Technical Parameter

General parameter
Applicable material PET, PEN, PC, PP etc.
Nominal capacity 1800 bottles/hr  (PET, 16g, 8 cavities for each mold)
                          Capacity is subject to mold cavity number, product weight, material
Screw diameter Φ60mm
Length/dia. ratio of screw 22:1
Max. theory injection volume 400cm³
Max. injection pressure 100MPa
Max. plasticization 32g/s
Injection mold closing force 360kN
Injection mold stroke 425mm
Blow mold closing force 245kN
Blow mold stroke 70×2mm
Rotary disk stroke 225mm
Stretch seat stroke 140mm
Stretch bar stroke 100mm
Injection mold dim. 720mm×200mm
Unloaded cycle time 4.5s
Temp. regulating core stroke  300mm
Temp. regulating tank stroke 175mm
Stripping stroke 150mm
Max. product dia. and height 100 mm×200mm
Oil pump motor power 30 kW
Barrel & mold heating power 20.8 kW
Total power 50.8 kW (The parameter differing on the number of cavity)
Working power 60-70% (The parameter differing on the type of product)
Center height 1350mm
Overall dimension 5000mm×1800mm×3100mm  (L×W×H)
Weight Approx. 12 tons
 
Outsourcing power
Power source 3N+PE 50Hz  380V/220V  (Three-phase five-wire) Subject to adjustment according to the end-use country
Blowing air-pressure 3-3.5MPa  (PET, PEN)
                              1.2-1.5MPa  (PC, PP)
Blowing air-flowrate 500L/min
Pressure for low-pressure air 0.7-0.9MPa
Flowrate for low-pressure air 40L/min  (0.7-0.9Mpa pressure)
Cooling water pressure 0.3-0.4MPa
Cooling water flowrate 50L/min  (PET, PEN, PP)
Cooling water temperature 10-15  (PET, PEN)
                                       15-30  (PP)
Flowrate for cooling tower 80L/min
Pressure for cooling tower 0.2-0.4MPa
Cooling tower temp. 5-32