Injection Stretch Blow Molding Machine ISBM-400

1.made of PET,PP and etc. bottles 2.one-step machine 3.used for water,pharmaceutical,food and juice bottles

ISBM 400 Automatic Injection Stretch Blow Molding MachineTechnical Parameter

General parameterApplicable material PET, PEN, PC, PP etc.Nominal capacity 1800 bottles/hr  (PET, 16g, 8 cavities for each mold)                          Capacity is subject to mold cavity number, product weight, materialScrew diameter Φ60mmLength/dia. ratio of screw 22:1Max. theory injection volume 400cm³Max. injection pressure 100MPaMax. plasticization 32g/sInjection mold closing force 360kNInjection mold stroke 425mmBlow mold closing force 245kNBlow mold stroke 70×2mmRotary disk stroke 225mmStretch seat stroke 140mmStretch bar stroke 100mmInjection mold dim. 720mm×200mmUnloaded cycle time 4.5sTemp. regulating core stroke  300mmTemp. regulating tank stroke 175mmStripping stroke 150mmMax. product dia. and height 100 mm×200mmOil pump motor power 30 kWBarrel & mold heating power 20.8 kWTotal power 50.8 kW (The parameter differing on the number of cavity)Working power 60-70% (The parameter differing on the type of product)Center height 1350mmOverall dimension 5000mm×1800mm×3100mm  (L×W×H)Weight Approx. 12 tons Outsourcing powerPower source 3N+PE 50Hz  380V/220V  (Three-phase five-wire) Subject to adjustment according to the end-use countryBlowing air-pressure 3-3.5MPa  (PET, PEN)                              1.2-1.5MPa  (PC, PP)Blowing air-flowrate 500L/minPressure for low-pressure air 0.7-0.9MPaFlowrate for low-pressure air 40L/min  (0.7-0.9Mpa pressure)Cooling water pressure 0.3-0.4MPaCooling water flowrate 50L/min  (PET, PEN, PP)Cooling water temperature 10-15  (PET, PEN)                                       15-30  (PP)Flowrate for cooling tower 80L/minPressure for cooling tower 0.2-0.4MPaCooling tower temp. 5-32

Injection Stretch Blow Molding Machine ISBM-400